JPI EDM 900
The EDM900 Primary system replaces old steam gauges with the most advanced piston engine-monitoring instrument available. It can be installed vertically or horizontally with nearly unlimited options due to its offset rear processor. TSO’d as a PRIMARY instrument, the EDM900 acts as a Flight Engineer, Maintenance Manager, and Backup Instrument. It continuously monitors engine parameters, warning you instantly if limits are exceeded, allowing you to focus on flying. You can fly without pushing any buttons, knowing it's constantly watching over your engine. For its price, nothing compares to the EDM900.
INSTALLATION REQUEST
Linearized Accuracy
Accuracy and Resolution, are two of the most misunderstood terms in instrumentation. Because an instrument displays 1 degree increments (resolution) does not mean it is accurate to 1 degree. JPI’s accuracy comes from its linearized thermocouples. Other’ put and estimating straight line through the center of the thermocouple calibration “S” curve. With this method the instrument is accurate at only three points along as the the straight line crosses the “S” curve. Therefore errors of +/- 10′ are quite possible while still displaying in 1degree resolution. Our competition is advertising +/- 1/2′ accuracy at full scale. This would mean that =/-1/2′ of 2000′ (full scale) is +/- 10′; there is a big difference. JPI has found nothing in the Aviation market that compares to our linearized accuracy.
The EDM-900 is certified as a primary flight instrument. With the 900 on board, you can remove many of your old engine gauges, and open up valuable space in your panel. Fly with confidence as your EDM-900 acts as your full time on-board flight engineer.
Features:
- Pre-Wired Harness for all functions- New Display SVGA & view angle 85 degrees
- Back lit buttons
- USB Memory stick 1 GB
- Data Recording 800 Hrs every 6 sec.
- EZTrends Graphing Software free
Monitoring Mods
The RPM Prop, MAP Manifold Pressure, and % HP ensure optimal engine performance, while the EGT and CHT monitor temperature metrics. Utilize the EGT Normalize mode and the exclusive JPI LOP/ROP Leaning Mode for enhanced efficiency. Monitor vital metrics such as oil temperature and pressure, fuel pressure, and outside air temperature. Stay informed with voltage readings, current amps (especially for twins), and fuel flow via the FlowScan transducer. Track fuel consumption with GPH, required fuel to destination, and used fuel stats. Calculate your flight's endurance in hours and minutes, and efficiency with miles per gallon. Additionally, safeguard your engine with shock cooling alerts for all cylinders and monitor the difference between EGTs.
- RPM Prop
- MAP Manifold Pressure
- % HP Percent of Horse Power
- EGT Exhaust Gas Temp.
- CHT Cylinder Head Temp.
- EGT Normalize mode
- LOP/ROP JPI Exclusive Leaning Mode
- O-T Oil Temperature
- O-P Oil Pressure
- F-P Fuel Pressure (when in POH)
- OAT Outside Air Temp.
- VDC Voltage (1)
- AMP Current amps (2 twins)
- Fuel Flow Transducer FlowScan
- GPH Gallons per Hour
- REQ Required to wp or destination
- USD Fuel used
- H:M Endurance Hours and Minutes
- MPG Miles per Gal
- CLD Shock Cooling on ALL cylinders
- DIFF Difference between EGT’s
